How to correctly assemble an electric adjustable desk in 15 minutes – Quick guide by DAB4Office
An electric height-adjustable desk brings ergonomics, flexibility, and comfort to any workspace. But to enjoy all its benefits, it must be assembled correctly. The good news? With a few tools and a little organization, you can assemble it in just 15 minutes.
In this guide, we will show you step-by-step how to correctly assemble an electric height-adjustable desk purchased from DAB4Office, whether it is new or refurbished second-hand.
What do you receive in the box?
Each desk comes securely packaged, and the package contains:
- Adjustable metal frame (in 2 main pieces)
- 1 or 2 motors (depending on the model)
- Digital control panel
- Desktop (optional, depending on the order)
- Screws, clamps, and brackets
- Power adapter & cables
If anything is missing, contact us immediately at mobila@dab4office.ro and we will help you promptly.
The tools you need
- Electric or manual screwdriver
- Allen key (included in the package for most models)
- Tape measure (optional, for precise alignment)
Assembly steps – guaranteed 15 minutes
1. Assemble the metal frame
- Place the two legs parallel on the floor.
- Connect the adjustable crossbar (adjustable for desktops between 110–160 cm).
- Secure it with the included screws.
2. Attach the motors (if they are separate)
- In 2-motor models, each leg already has the motor integrated.
- Check that the cables are free and unbent.
3. Attach the desktop
- Place the frame on the back of the desktop, centered.
- Secure the frame to the desktop using the included screws (we recommend an electric screwdriver).
- Do not tighten completely at first – align everything perfectly, then secure.
4. Attach the control panel
- The panel is attached under the desktop, on the right or left side (according to your preference).
- Leave enough space so you don't hit it with your knees when sitting down.
- Secure it with the 2-4 small screws included.
5. Connect the cables
- Connect the motors to the control box.
- Connect the control panel.
- Plug the adapter into the outlet.
- Perform a test: press "up" and "down". If it works, proceed to the final step.
6. Hide and organize the cables
- Use the included clamps or cable ties to secure them under the desktop.
- Avoid letting the wires hang or touch the floor.
7. Turn the desk over and test it again
- Carefully turn the desk onto its legs (ideally with 2 people).
- Test all functions: raising, lowering, memories (if available).
⏱️ Quick tips:
- Assemble the desk on a soft surface (carpet, blanket) so as not to scratch the desktop.
- If you don't have a desktop, you can order just the adjustable frame and customize it with your own.
- Estimated time: 15–20 minutes with an electric screwdriver.
💬 Frequently asked questions
How much does a complete desk weigh?
Between 25 and 45 kg, depending on the desktop and the number of motors.
Can I assemble it alone?
Yes, but it is easier with the help of a second person when turning the desk over.
What do I do if the motor doesn't work?
Check all connections and the power supply. If the problem persists, send a message to mobila@dab4office.ro – we have a dedicated technical team.


